HOW TO SWITCH OFF YOUR WATER MAIN IN AN EMERGENCY SITUATION

How To Switch off Your Water Main In an Emergency Situation

How To Switch off Your Water Main In an Emergency Situation

Blog Article

Call Us Now


Just how do you actually feel about How to Turn Off Water To House and Prevent Damage?


How to Turn off the Water for Plumbing Repairs
One of the most usual places a water main will be found in residence remains in your boiler room, cellar, or a cut out panel in a section for your home.
When you discover the water pipe you will merely transform the shutoff clockwise to close all the water off in your home until you have finished the repair work. Some houses will certainly enjoy shutoff with a bar that you can draw as opposed to resort to close the water off.
If you try to shut the water off to your fixtures by using an angle stop and that doesn't work you will certainly have to shut of the water main to make your repair work. There are likewise numerous other reasons you may need to shut the water main like repairing frozen pipelines, fixing leakages, changing components or taps.
Lots of people are not conscious that they even have a water main valve right in their own house and simply call a plumber of never ever end up doing the repair service up until points get truly negative due to the fact that they just do not know that shutting the water main is really easy.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Find and Shut Off Main Water Shutoff Valve

I recently found that blog entry on How to Turn off the Water for Plumbing Repairs when doing a search on the search engines. Remember to take the time to promote this blog if you appreciated it. Thank-you for taking the time to read it.



Get Estimate

Report this page